---
title: Major Releases
---
<Callout type="info">
This page only covers **major breaking changes**. For patch and minor changes, refer to the individual package `CHANGELOG.md` files or visit the [GitHub Releases](https://github.com/udecode/plate/releases) page.
</Callout>
This PR was opened by the [Changesets release](https://github.com/changesets/action) GitHub action. When you're ready to do a release, you can merge this and the packages will be published to npm automatically. If you're not ready to do a release yet, that's fine, whenever you add more changesets to main, this PR will be updated.
# 49.0.0
## platejs@49.0.0
- [#4327](https://github.com/udecode/plate/pull/4327) by [@zbeyens](https://github.com/zbeyens) –
- Renamed package to `platejs`:
- Replace all `@udecode/plate/react` with `platejs/react`
- Replace all `'@udecode/plate'` with `'platejs'`
## @platejs/slate@49.0.0
- [#4327](https://github.com/udecode/plate/pull/4327) by [@zbeyens](https://github.com/zbeyens) –
- Renamed all `@udecode/plate-*` packages to `@platejs/*`. Replace `@udecode/plate-` with `@platejs/` in your code.
- [#4327](https://github.com/udecode/plate/pull/4327) by [@zbeyens](https://github.com/zbeyens) –
- Replaced `editor.api.shouldMergeNodesRemovePrevNode` with `editor.api.shouldMergeNodes`. `shouldMergeNodes` is now controlling the remove + merge behavior
- Returns `true` if the default merging behavior should be applied.
- Returns `false` if the default merging behavior should not be applied. This is used by Plate to prevent void blocks deletion, and to prioritize empty block deletion over merging.
```ts
// Before
editor.api.shouldMergeNodesRemovePrevNode(prev, current);
// After
editor.api.shouldMergeNodes(prev, current);
```
- Replace `editor.api.fragment` option `structuralTypes` with `unwrap`.
```ts
// Before
editor.api.fragment(editor.selection, { structuralTypes: ['table'] });
// After
editor.api.fragment(editor.selection, { unwrap: ['table'] });
```
### Minor Changes
- [#4327](https://github.com/udecode/plate/pull/4327) by [@zbeyens](https://github.com/zbeyens) –
- `editor.tf.insertSoftBreak` now inserts a soft break instead of a hard break.
## @platejs/core@49.0.0
- [#4327](https://github.com/udecode/plate/pull/4327) by [@zbeyens](https://github.com/zbeyens) –
- `editor.getType()` now takes a `pluginKey: string` instead of a `plugin: PlatePlugin` instance.
- Example: Use `editor.getType(ParagraphPlugin.key)` instead of `editor.getType(ParagraphPlugin)`.
- Plugins without a `key` property will not be registered into the editor.
- Passing `disabled: true` prop to `PlateContent` will now also set the editor to `readOnly: true` state internally.
- Editor DOM state properties have been moved under `editor.dom` namespace:
- `editor.currentKeyboardEvent` is now `editor.dom.currentKeyboardEvent`.
- `editor.prevSelection` is now `editor.dom.prevSelection`.
- Editor metadata properties have been moved under `editor.meta` namespace:
- `editor.isFallback` is now `editor.meta.isFallback`
- `editor.key` is now `editor.meta.key`
- `editor.pluginList` is now `editor.meta.pluginList`
- `editor.shortcuts` is now `editor.meta.shortcuts`
- `editor.uid` is now `editor.meta.uid`
- `NodeIdPlugin` is now enabled by default as part of the core plugins. This automatically assigns unique IDs to block nodes.
- Migration: If you were not previously using `NodeIdPlugin` and wish to maintain the old behavior (no automatic IDs), explicitly disable it in your editor configuration:
```ts
const editor = usePlateEditor({
// ...other options
nodeId: false, // Disables automatic node ID generation
});
```
- The `components` prop has been removed from `serializeHtml` and `PlateStatic`.
- Migration: Pass the `components` to `createSlateEditor({ components })` or the individual plugins instead.
- Plugin Shortcuts System Changes:
- Shortcut keys defined in `editor.shortcuts` are now namespaced by the plugin key (e.g., `code.toggle` for `CodePlugin`).
- The `priority` property for shortcuts is used to resolve conflicts when multiple shortcuts share the exact same key combination, not for overriding shortcuts by name.
- `preventDefault` for plugin shortcuts now defaults to `true`, unless the handler returns `false` (i.e. not handled). This means browser default actions for these key combinations will be prevented unless explicitly allowed.
- Migration: If you need to allow browser default behavior for a specific shortcut, set `preventDefault: false` in its configuration:
```ts
MyPlugin.configure({
shortcuts: {
myAction: {
keys: 'mod+s',
preventDefault: false, // Example: Allow browser's default save dialog
},
},
});
```
- [#4327](https://github.com/udecode/plate/pull/4327) by [@zbeyens](https://github.com/zbeyens) –
- Renamed all `@udecode/plate-*` packages to `@platejs/*`. Replace `@udecode/plate-` with `@platejs/` in your code.
### Minor Changes
- [#4327](https://github.com/udecode/plate/pull/4327) by [@zbeyens](https://github.com/zbeyens) –
- New editor DOM state fields available under `editor.dom`:
- `editor.dom.composing`: Boolean, true if the editor is currently composing text (e.g., during IME input).
- `editor.dom.focused`: Boolean, true if the editor currently has focus.
- `editor.dom.readOnly`: Boolean, true if the editor is in read-only mode. Passing the `readOnly` prop to `PlateContent` will sync its value to this state and to the `useEditorReadOnly` hook.
- New editor metadata fields:
- `editor.meta.components` - stores the plugin components by key
- New hook `useEditorComposing`: Allows subscription to the editor's composing state (`editor.dom.composing`) outside of `PlateContent`.
- `createPlateEditor` and `usePlateEditor` now accept a `readOnly` option to initialize the editor in a read-only state. For dynamic read-only changes after initialization, continue to use the `readOnly` prop on the `<Plate>` or `<PlateContent>` component.
- New plugin field: `editOnly` (boolean or object).
- When `true` or when specific properties are true in the object, Plate will disable certain plugin behaviors (handlers, rendering, injections) in read-only mode and re-enable them if the editor becomes editable.
- By default, `render`, `handlers`, and `inject` are considered edit-only (`true`). `normalizeInitialValue` defaults to always active (`false`).
- Example: `editOnly: { render: false, normalizeInitialValue: true }` would make rendering active always, but normalization only in edit mode.
- New plugin field: `render.as` (`keyof HTMLElementTagNameMap`).
- Specifies the default HTML tag name to be used by `PlateElement` (default: `'div'`) or `PlateLeaf` (default: `'span'`) when rendering the node, but only if no custom `node.component` is provided for the plugin.
- Example: `render: { as: 'h1' }` would make the plugin render its node as an `<h1>` tag by default without the need to provide a custom component.
- New plugin field: `node.isContainer` (boolean).
- When `true`, indicates that the plugin's elements are primarily containers for other content.
- New plugin field: `node.isStrictSiblings` (boolean).
- When `true`, indicates that the element enforces strict sibling type constraints and only allows specific siblings (e.g., `td` can only have `td` siblings, `column` can only have `column` siblings).
- Used by `editor.tf.insertExitBreak` functionality to determine appropriate exit points in nested structures.
- New plugin field: `rules` (object).
- Configures common editing behaviors declaratively instead of overriding editor methods. See documentation for more details.
- `rules.break`: Controls Enter key behavior (`empty`, `default`, `emptyLineEnd`, `splitReset`)
- `rules.delete`: Controls Backspace key behavior (`start`, `empty`)
- `rules.merge`: Controls block merging behavior (`removeEmpty`)
- `rules.normalize`: Controls normalization behavior (`removeEmpty`)
- `rules.selection`: Controls cursor positioning behavior (`affinity`)
- `rules.match`: Conditional rule application based on node properties
- Plugin shortcuts can now automatically leverage existing plugin transforms by specifying the transform name, in addition to custom handlers.
- New editor transform methods for keyboard handling:
- `editor.tf.escape`: Handle Escape key events. Returns `true` if the event is handled.
- `editor.tf.moveLine`: Handle ArrowDown and ArrowUp key events with `reverse` option for direction. Returns `true` if the event is handled.
- `editor.tf.selectAll`: Handle Ctrl/Cmd+A key events for selecting all content. Returns `true` if the event is handled.
- `editor.tf.tab`: Handle Tab and Shift+Tab key events with `reverse` option for Shift+Tab. Returns `true` if the event is handled.
## @platejs/utils@49.0.0
- [#4327](https://github.com/udecode/plate/pull/4327) by [@zbeyens](https://github.com/zbeyens) –
- Renamed all `@udecode/plate-*` packages to `@platejs/*`. Replace `@udecode/plate-` with `@platejs/` in your code.
- [#4327](https://github.com/udecode/plate/pull/4327) by [@zbeyens](https://github.com/zbeyens) –
- Node type definitions (e.g., `TImageElement`, `TParagraphElement`) previously co-located with their respective plugin packages (like `@udecode/plate-media`) have been centralized into `@platejs/utils`. These are typically re-exported via the main `platejs` package.
- Migration: Update imports for these types to pull from `platejs`.
```tsx
// Before
// import { TImageElement } from '@udecode/plate-media';
// After
import { TImageElement } from 'platejs';
```
- Removed `structuralTypes` option from `useSelectionFragment` and `useSelectionFragmentProp`. These hooks now automatically use `plugin.node.isContainer` from enabled plugins.
- Removed:
- `createNodesHOC`
- `createNodesWithHOC`
- `createNodeHOC`
- Removed `usePlaceholderState` hook.
- Migration: Use the `BlockPlaceholderPlugin` (typically from `platejs`) instead of the `withPlaceholders` HOC and `usePlaceholderState`. Configure placeholders directly within the `BlockPlaceholderPlugin` options.
```ts
// Example BlockPlaceholderPlugin configuration
BlockPlaceholderPlugin.configure({
options: {
className:
'before:absolute before:cursor-text before:opacity-30 before:content-[attr(placeholder)]',
placeholders: {
[ParagraphPlugin.key]: 'Type something...',
// ...other placeholders
},
query: ({ editor, path }) => {
// Example query: only show for top-level empty blocks
return (
path.length === 1 && editor.api.isEmpty(editor.children[path[0]])
);
},
},
});
```
## @platejs/ai@49.0.0
- [#4327](https://github.com/udecode/plate/pull/4327) by [@zbeyens](https://github.com/zbeyens) –
- Copilot API method changes:
- `editor.api.copilot.accept` is now `editor.tf.copilot.accept`.
- `editor.api.copilot.acceptNextWord` is now `editor.tf.copilot.acceptNextWord`.
- `editor.api.copilot.reset` is now `editor.api.copilot.reject`.
- Removed Default Shortcuts for Copilot:
- Only `accept` (Tab) and `reject` (Escape) shortcuts are included by default for `CopilotPlugin`.
- `acceptNextWord` and `triggerSuggestion` shortcuts must now be configured manually using the `shortcuts` field when configuring the plugin.
- Example:
```tsx
CopilotPlugin.configure({
// ... other options
shortcuts: {
acceptNextWord: {
keys: 'mod+right',
},
triggerSuggestion: {
keys: 'ctrl+space',
},
},
});
```
- [#4327](https://github.com/udecode/plate/pull/4327) by [@zbeyens](https://github.com/zbeyens) –
- Renamed all `@udecode/plate-*` packages to `@platejs/*`. Replace `@udecode/plate-` with `@platejs/` in your code.
## @platejs/alignment@49.0.0
- [#4327](https://github.com/udecode/plate/pull/4327) by [@zbeyens](https://github.com/zbeyens) –
- Package `@udecode/plate-alignment` has been deprecated.
- `TextAlignPlugin` (formerly `AlignPlugin`) has been moved to the `@platejs/basic-styles` package.
- Migration:
- Remove `@udecode/plate-alignment` from your dependencies.
- Add `@platejs/basic-styles` to your dependencies if not already present.
- Import `TextAlignPlugin` from `@platejs/basic-styles/react`.
- Renamed `AlignPlugin` to `TextAlignPlugin` and changed plugin key from `'align'` to `'textAlign'`.
```ts
// Before
import { AlignPlugin } from '@udecode/plate-alignment/react';
// After
import { TextAlignPlugin } from '@platejs/basic-styles/react';
```
- `setAlign` signature change:
```ts
// Before
setAlign(editor, { value: 'center', setNodesOptions });
// After
setAlign(editor, 'center', setNodesOptions);
```
- Removed `useAlignDropdownMenu` and `useAlignDropdownMenuState`. Use it in your own codebase, for example:
```tsx
export function AlignToolbarButton() {
const editor = useEditorRef();
const value = useSelectionFragmentProp({
defaultValue: 'start',
structuralTypes,
getProp: (node) => node.align,
});
const onValueChange = (newValue: string) => {
editor.tf.textAlign.setNodes(newValue as Alignment);
editor.tf.focus();
};
// ...
}
```
## @platejs/autoformat@49.0.0
- [#4327](https://github.com/udecode/plate/pull/4327) by [@zbeyens](https://github.com/zbeyens) –
- Replaced `BaseAutoformatPlugin` with `AutoformatPlugin`, which is no longer a React plugin. Migration: Replace `@udecode/plate-autoformat/react` import with `@udecode/plate-autoformat`.
- [#4327](https://github.com/udecode/plate/pull/4327) by [@zbeyens](https://github.com/zbeyens) –
- The following plugins now default to `editOnly: true`. This means their core functionalities (handlers, rendering injections, etc.) will be disabled when the editor is in read-only mode. To override this behavior for a specific plugin, configure its `editOnly` field. For example, `SomePlugin.configure({ editOnly: false })`.
- [#4327](https://github.com/udecode/plate/pull/4327) by [@zbeyens](https://github.com/zbeyens) –
- Renamed all `@udecode/plate-*` packages to `@platejs/*`. Replace `@udecode/plate-` with `@platejs/` in your code.
## @platejs/basic-elements@49.0.0
- [#4327](https://github.com/udecode/plate/pull/4327) by [@zbeyens](https://github.com/zbeyens) –
- Package `@udecode/plate-basic-elements` has been deprecated.
- `BasicElementsPlugin` has been renamed to `BasicBlocksPlugin`.
- Its plugins have been moved to the new `@platejs/basic-nodes` package.
- Migration:
- Replace `@udecode/plate-basic-elements` with `@platejs/basic-nodes` in your dependencies.
- Update import paths from `@udecode/plate-basic-elements/react` to `@platejs/basic-nodes/react`.
- For detailed changes to individual plugins, default HTML tags, and shortcut configurations, refer to the changeset for `@platejs/basic-nodes`.
## @platejs/basic-marks@49.0.0
- [#4327](https://github.com/udecode/plate/pull/4327) by [@zbeyens](https://github.com/zbeyens) –
- Package `@udecode/plate-basic-marks` has been deprecated.
- Its plugins have been moved to the new `@platejs/basic-nodes` package.
- Migration:
- Replace `@udecode/plate-basic-marks` with `@platejs/basic-nodes` in your dependencies.
- Update import paths from `@udecode/plate-basic-marks/react` to `@platejs/basic-nodes/react`.
- For detailed changes to individual plugins, default HTML tags, and shortcut configurations, refer to the changeset for `@platejs/basic-nodes`.
## @platejs/basic-nodes@49.0.0
- [#4327](https://github.com/udecode/plate/pull/4327) by [@zbeyens](https://github.com/zbeyens) –
- The packages `@udecode/plate-basic-elements` and `@udecode/plate-basic-marks` have been deprecated. All their plugins are now consolidated into the new `@platejs/basic-nodes` package.
- **Migration**:
- Replace `@udecode/plate-basic-elements` and `@udecode/plate-basic-marks` in your dependencies with `@platejs/basic-nodes`.
- Update all import paths from `@udecode/plate-basic-elements/react` or `@udecode/plate-basic-marks/react` to `@platejs/basic-nodes/react`.
- `CodeBlockPlugin` is **not** part of `@platejs/basic-nodes`. Ensure it is imported from `@platejs/code-block/react`.
- `SkipMarkPlugin` (standalone) is removed. Its functionality is now built into the core editor. To enable boundary clearing for a specific mark, configure the mark plugin directly: `plugin.configure({ rules: { selection: { affinity: 'outward' } } })`.
- Default HTML Tag Changes:
- **Blocks**: Element plugins in `@udecode/plate-basic-nodes` (e.g., `BlockquotePlugin`, `HeadingPlugin`, `HorizontalRulePlugin`) now default to rendering with specific HTML tags (`<blockquote>`, `<h1>-<h6>`, `<hr>` respectively). `ParagraphPlugin` still defaults to `<div>`. If you relied on previous defaults or need different tags, provide a custom component or use the `render.as` option.
- **Marks**: Mark plugins in `@udecode/plate-basic-nodes` (e.g., `BoldPlugin`, `CodePlugin`, `ItalicPlugin`) now default to specific HTML tags (`<strong>`, `<code>`, `<em>` respectively). If you relied on previous defaults or need different tags, provide a custom component or use the `render.as` option.
- Removed Default Shortcuts:
- Default keyboard shortcuts are no longer bundled with most plugins (exceptions: bold, italic, underline).
- Configure shortcuts manually via the `shortcuts` field in plugin configuration.
- Example (Block Plugins):
```ts
H1Plugin.configure({ shortcuts: { toggle: { keys: 'mod+alt+1' } } });
BlockquotePlugin.configure({
shortcuts: { toggle: { keys: 'mod+shift+period' } },
});
```
- Example (Mark Plugins):
```ts
CodePlugin.configure({ shortcuts: { toggle: { keys: 'mod+e' } } });
StrikethroughPlugin.configure({
shortcuts: { toggle: { keys: 'mod+shift+x' } },
});
SubscriptPlugin.configure({
shortcuts: { toggle: { keys: 'mod+comma' } },
});
SuperscriptPlugin.configure({
shortcuts: { toggle: { keys: 'mod+period' } },
});
HighlightPlugin.configure({
shortcuts: { toggle: { keys: 'mod+shift+h' } },
});
```
## @platejs/block-quote@49.0.0
- [#4327](https://github.com/udecode/plate/pull/4327) by [@zbeyens](https://github.com/zbeyens) –
- Package `@udecode/plate-block-quote` has been deprecated.
- `BlockquotePlugin` has been moved to the `@platejs/basic-nodes` package.
- Migration:
- Remove `@udecode/plate-block-quote` from your dependencies.
- Add `@platejs/basic-nodes` to your dependencies if not already present.
- Import `BlockquotePlugin` from `@platejs/basic-nodes/react`.
## @platejs/break@49.0.0
- [#4327](https://github.com/udecode/plate/pull/4327) by [@zbeyens](https://github.com/zbeyens) –
- Package `@udecode/plate-break` has been deprecated.
- `SoftBreakPlugin` has been removed. Migration:
- For `shift+enter` rules: no migration is needed - this behavior is built into Plate by default.
- For `enter` rules: use `plugin.configure({ rules: { break: { default: 'lineBreak' } } })` to insert a line break instead of a hard break on `Enter` keydown when the selection is within the configured node type.
- For more complex break rules: use `overrideEditor` to override the `insertBreak` transform with custom logic.
- `ExitBreakPlugin` has been moved to `@platejs/utils` (which is re-exported via `platejs`) with a simplified API and improved behavior.
- **Behavior Change**: Instead of always exiting to the root level of the document, exiting will now insert a block to the nearest exitable ancestor that has `isStrictSiblings: false`. This means deeply nested structures (like tables in columns) are exitable at many levels.
- Migration:
- Remove `@udecode/plate-break` from your dependencies.
- Replace `@udecode/plate-break` import with `platejs`.
- **Important**: If not using Plate plugins, you must set `isStrictSiblings: true` on your custom node plugins that can't have paragraph siblings for exit break to work correctly.
- Replace complex rule-based configuration with simple shortcuts:
```tsx
// Before (old API)
ExitBreakPlugin.configure({
options: {
rules: [
{ hotkey: 'mod+enter' },
{ hotkey: 'mod+shift+enter', before: true },
],
},
});
// After (new API)
ExitBreakPlugin.configure({
shortcuts: {
insert: { keys: 'mod+enter' },
insertBefore: { keys: 'mod+shift+enter' },
},
});
```
## @platejs/callout@49.0.0
- [#4327](https://github.com/udecode/plate/pull/4327) by [@zbeyens](https://github.com/zbeyens) –
- Renamed all `@udecode/plate-*` packages to `@platejs/*`. Replace `@udecode/plate-` with `@platejs/` in your code.
## @platejs/caption@49.0.0
- [#4327](https://github.com/udecode/plate/pull/4327) by [@zbeyens](https://github.com/zbeyens) –
- `CaptionPlugin` option `options.plugins` (accepting an array of `PlatePlugin`) has been renamed to `options.query.allow` (accepting an array of plugin keys).
- Migration:
```tsx
// Before
CaptionPlugin.configure({
options: {
plugins: [ImagePlugin], // ImagePlugin is an example
},
});
// After
CaptionPlugin.configure({
options: {
query: {
allow: [ImagePlugin.key], // Use the plugin's key
},
},
});
```
- [#4327](https://github.com/udecode/plate/pull/4327) by [@zbeyens](https://github.com/zbeyens) –
- Renamed all `@udecode/plate-*` packages to `@platejs/*`. Replace `@udecode/plate-` with `@platejs/` in your code.
## @platejs/code-block@49.0.0
- [#4327](https://github.com/udecode/plate/pull/4327) by [@zbeyens](https://github.com/zbeyens) –
- `CodeBlockPlugin` now defaults to rendering the code block container with a `<pre>` HTML tag if no custom component is provided for `CodeBlockElement` (or the plugin key `code_block`).
## @platejs/combobox@49.0.0
- [#4327](https://github.com/udecode/plate/pull/4327) by [@zbeyens](https://github.com/zbeyens) –
- Renamed all `@udecode/plate-*` packages to `@platejs/*`. Replace `@udecode/plate-` with `@platejs/` in your code.
## @platejs/comments@49.0.0
- [#4327](https://github.com/udecode/plate/pull/4327) by [@zbeyens](https://github.com/zbeyens) –
- `CommentsPlugin` has been renamed to `CommentPlugin`.
- Update imports and plugin configurations accordingly.
- Example: `CommentsPlugin.key` becomes `CommentPlugin.key`.
- Package name has been changed to `@platejs/comment`.
- [#4327](https://github.com/udecode/plate/pull/4327) by [@zbeyens](https://github.com/zbeyens) –
- Renamed all `@udecode/plate-*` packages to `@platejs/*`. Replace `@udecode/plate-` with `@platejs/` in your code.
## @platejs/csv@49.0.0
- [#4327](https://github.com/udecode/plate/pull/4327) by [@zbeyens](https://github.com/zbeyens) –
- Renamed all `@udecode/plate-*` packages to `@platejs/*`. Replace `@udecode/plate-` with `@platejs/` in your code.
## @platejs/cursor@49.0.0
- [#4327](https://github.com/udecode/plate/pull/4327) by [@zbeyens](https://github.com/zbeyens) –
- Renamed all `@udecode/plate-*` packages to `@platejs/*`. Replace `@udecode/plate-` with `@platejs/` in your code.
## @platejs/date@49.0.0
- [#4327](https://github.com/udecode/plate/pull/4327) by [@zbeyens](https://github.com/zbeyens) –
- Renamed all `@udecode/plate-*` packages to `@platejs/*`. Replace `@udecode/plate-` with `@platejs/` in your code.
## @platejs/diff@49.0.0
- [#4327](https://github.com/udecode/plate/pull/4327) by [@zbeyens](https://github.com/zbeyens) –
- Renamed all `@udecode/plate-*` packages to `@platejs/*`. Replace `@udecode/plate-` with `@platejs/` in your code.
## @platejs/dnd@49.0.0
- [#4327](https://github.com/udecode/plate/pull/4327) by [@zbeyens](https://github.com/zbeyens) –
- The following plugins now default to `editOnly: true`. This means their core functionalities (handlers, rendering injections, etc.) will be disabled when the editor is in read-only mode. To override this behavior for a specific plugin, configure its `editOnly` field. For example, `SomePlugin.configure({ editOnly: false })`.
- [#4327](https://github.com/udecode/plate/pull/4327) by [@zbeyens](https://github.com/zbeyens) –
- Renamed all `@udecode/plate-*` packages to `@platejs/*`. Replace `@udecode/plate-` with `@platejs/` in your code.
## @platejs/docx@49.0.0
- [#4327](https://github.com/udecode/plate/pull/4327) by [@zbeyens](https://github.com/zbeyens) –
- The following plugins now default to `editOnly: true`. This means their core functionalities (handlers, rendering injections, etc.) will be disabled when the editor is in read-only mode. To override this behavior for a specific plugin, configure its `editOnly` field. For example, `SomePlugin.configure({ editOnly: false })`.
- [#4327](https://github.com/udecode/plate/pull/4327) by [@zbeyens](https://github.com/zbeyens) –
- Renamed all `@udecode/plate-*` packages to `@platejs/*`. Replace `@udecode/plate-` with `@platejs/` in your code.
## @platejs/emoji@49.0.0
- [#4327](https://github.com/udecode/plate/pull/4327) by [@zbeyens](https://github.com/zbeyens) –
- The following plugins now default to `editOnly: true`. This means their core functionalities (handlers, rendering injections, etc.) will be disabled when the editor is in read-only mode. To override this behavior for a specific plugin, configure its `editOnly` field. For example, `SomePlugin.configure({ editOnly: false })`.
- [#4327](https://github.com/udecode/plate/pull/4327) by [@zbeyens](https://github.com/zbeyens) –
- Renamed all `@udecode/plate-*` packages to `@platejs/*`. Replace `@udecode/plate-` with `@platejs/` in your code.
## @platejs/excalidraw@49.0.0
- [#4327](https://github.com/udecode/plate/pull/4327) by [@zbeyens](https://github.com/zbeyens) –
- Renamed all `@udecode/plate-*` packages to `@platejs/*`. Replace `@udecode/plate-` with `@platejs/` in your code.
## @platejs/find-replace@49.0.0
- [#4327](https://github.com/udecode/plate/pull/4327) by [@zbeyens](https://github.com/zbeyens) –
- Renamed all `@udecode/plate-*` packages to `@platejs/*`. Replace `@udecode/plate-` with `@platejs/` in your code.
## @platejs/floating@49.0.0
- [#4327](https://github.com/udecode/plate/pull/4327) by [@zbeyens](https://github.com/zbeyens) –
- Renamed all `@udecode/plate-*` packages to `@platejs/*`. Replace `@udecode/plate-` with `@platejs/` in your code.
## @platejs/font@49.0.0
- [#4327](https://github.com/udecode/plate/pull/4327) by [@zbeyens](https://github.com/zbeyens) –
- Removed `setBlockBackgroundColor`
- Removed `setFontSize` – use `tf.fontSize.addMark` instead:
```ts
// Before
editor.api.fontSize.addMark('16px');
// After
editor.tf.fontSize.addMark('16px');
```
- Removed `useColorInput`. Use it in your own codebase, for example:
```tsx
function ColorInput() {
const inputRef = React.useRef<HTMLInputElement | null>(null);
const onClick = () => {
inputRef.current?.click();
};
// ...
}
```
- Removed `useColorsCustom` and `useColorsCustomState`. Use it in your own codebase, for example:
```tsx
function ColorCustom({ color, colors, customColors, updateCustomColor }) {
const [customColor, setCustomColor] = React.useState<string>();
const [value, setValue] = React.useState<string>(color || '#000000');
React.useEffect(() => {
if (
!color ||
customColors.some((c) => c.value === color) ||
colors.some((c) => c.value === color)
) {
return;
}
setCustomColor(color);
}, [color, colors, customColors]);
const computedColors = React.useMemo(
() =>
customColor
? [
...customColors,
{
isBrightColor: false,
name: '',
value: customColor,
},
]
: customColors,
[customColor, customColors]
);
const updateCustomColorDebounced = React.useCallback(
debounce(updateCustomColor, 100),
[updateCustomColor]
);
const inputProps = {
value,
onChange: (e: React.ChangeEvent<HTMLInputElement>) => {
setValue(e.target.value);
updateCustomColorDebounced(e.target.value);
},
};
// ...
}
```
- Removed `useColorDropdownMenu` and `useColorDropdownMenuState`. Use it in your own codebase, for example:
```tsx
export function FontColorToolbarButton({ nodeType }) {
const editor = useEditorRef();
const selectionDefined = useEditorSelector(
(editor) => !!editor.selection,
[]
);
const color = useEditorSelector(
(editor) => editor.api.mark(nodeType) as string,
[nodeType]
);
const [selectedColor, setSelectedColor] = React.useState<string>();
const [open, setOpen] = React.useState(false);
const onToggle = React.useCallback(
(value = !open) => {
setOpen(value);
},
[open, setOpen]
);
const updateColor = React.useCallback(
(value: string) => {
if (editor.selection) {
setSelectedColor(value);
editor.tf.select(editor.selection);
editor.tf.focus();
editor.tf.addMarks({ [nodeType]: value });
}
},
[editor, nodeType]
);
const clearColor = React.useCallback(() => {
if (editor.selection) {
editor.tf.select(editor.selection);
editor.tf.focus();
if (selectedColor) {
editor.tf.removeMarks(nodeType);
}
onToggle();
}
}, [editor, selectedColor, onToggle, nodeType]);
React.useEffect(() => {
if (selectionDefined) {
setSelectedColor(color);
}
}, [color, selectionDefined]);
// ...
}
```
## @platejs/heading@49.0.0
- [#4327](https://github.com/udecode/plate/pull/4327) by [@zbeyens](https://github.com/zbeyens) –
- Package `@udecode/plate-heading` has been deprecated.
- `HeadingPlugin` and individual heading plugins (e.g., `H1Plugin`) have been moved to `@platejs/basic-nodes`.
- Migration: Import from `@platejs/basic-nodes/react` (e.g., `import { HeadingPlugin } from '@platejs/basic-nodes/react';`).
- `TocPlugin` has been moved to `@platejs/toc`.
- Migration: Add `@platejs/toc` to your dependencies and import `TocPlugin` from `@platejs/toc/react`.
- Remove `@udecode/plate-heading` from your dependencies.
- `HEADING_LEVELS` has been removed. Use `KEYS.heading` instead.
## @platejs/highlight@49.0.0
- [#4327](https://github.com/udecode/plate/pull/4327) by [@zbeyens](https://github.com/zbeyens) –
- Package `@udecode/plate-highlight` has been deprecated.
- `HighlightPlugin` has been moved to the `@platejs/basic-nodes` package.
- Migration:
- Remove `@udecode/plate-highlight` from your dependencies.
- Add `@platejs/basic-nodes` to your dependencies if not already present.
- Import `HighlightPlugin` from `@platejs/basic-nodes/react`.
## @platejs/horizontal-rule@49.0.0
- [#4327](https://github.com/udecode/plate/pull/4327) by [@zbeyens](https://github.com/zbeyens) –
- Package `@udecode/plate-horizontal-rule` has been deprecated.
- `HorizontalRulePlugin` has been moved to the `@platejs/basic-nodes` package.
- Migration:
- Remove `@udecode/plate-horizontal-rule` from your dependencies.
- Add `@platejs/basic-nodes` to your dependencies if not already present.
- Import `HorizontalRulePlugin` from `@platejs/basic-nodes/react`.
## @platejs/indent@49.0.0
- [#4327](https://github.com/udecode/plate/pull/4327) by [@zbeyens](https://github.com/zbeyens) –
- Renamed all `@udecode/plate-*` packages to `@platejs/*`. Replace `@udecode/plate-` with `@platejs/` in your code.
## @platejs/indent-list@49.0.0
- [#4327](https://github.com/udecode/plate/pull/4327) by [@zbeyens](https://github.com/zbeyens) –
- Package `@udecode/plate-indent-list` has been renamed to `@platejs/list`.
- Migration:
- Rename all import paths from `@udecode/plate-indent-list` to `@platejs/list`.
- Update your `package.json`: remove `@udecode/plate-indent-list` and add `@platejs/list`.
## @platejs/juice@49.0.0
- [#4327](https://github.com/udecode/plate/pull/4327) by [@zbeyens](https://github.com/zbeyens) –
- Renamed all `@udecode/plate-*` packages to `@platejs/*`. Replace `@udecode/plate-` with `@platejs/` in your code.
## @platejs/kbd@49.0.0
- [#4327](https://github.com/udecode/plate/pull/4327) by [@zbeyens](https://github.com/zbeyens) –
- Package `@udecode/plate-kbd` has been deprecated.
- `KbdPlugin` has been moved to the `@platejs/basic-nodes` package.
- Migration:
- Remove `@udecode/plate-kbd` from your dependencies.
- Add `@platejs/basic-nodes` to your dependencies if not already present.
- Import `KbdPlugin` from `@platejs/basic-nodes/react`.
## @platejs/layout@49.0.0
- [#4327](https://github.com/udecode/plate/pull/4327) by [@zbeyens](https://github.com/zbeyens) –
- Delete backward from a column start will merge into the previous column
- [#4327](https://github.com/udecode/plate/pull/4327) by [@zbeyens](https://github.com/zbeyens) –
- Renamed all `@udecode/plate-*` packages to `@platejs/*`. Replace `@udecode/plate-` with `@platejs/` in your code.
## @platejs/line-height@49.0.0
- [#4327](https://github.com/udecode/plate/pull/4327) by [@zbeyens](https://github.com/zbeyens) –
- Package `@udecode/plate-line-height` has been deprecated.
- `LineHeightPlugin` has been moved to the `@platejs/basic-styles` package.
- Migration:
- Remove `@udecode/plate-line-height` from your dependencies.
- Add `@platejs/basic-styles` to your dependencies if not already present.
- Import `LineHeightPlugin` from `@platejs/basic-styles/react`.
- `setLineHeight` signature change:
```ts
// Before
setLineHeight(editor, { value: 1.5, setNodesOptions });
// After
setLineHeight(editor, 1.5, setNodesOptions);
```
- Removed `useLineHeightDropdownMenu` and `useLineHeightDropdownMenuState`. Use it in your own codebase, for example:
```tsx
export function LineHeightToolbarButton() {
const editor = useEditorRef();
const { defaultNodeValue, validNodeValues: values = [] } =
editor.getInjectProps(LineHeightPlugin);
const value = useSelectionFragmentProp({
defaultValue: defaultNodeValue,
getProp: (node) => node.lineHeight,
});
const onValueChange = (newValue: string) => {
editor.tf.lineHeight.setNodes(Number(newValue));
editor.tf.focus();
};
// ...
}
```
## @platejs/link@49.0.0
- [#4327](https://github.com/udecode/plate/pull/4327) by [@zbeyens](https://github.com/zbeyens) –
- Renamed all `@udecode/plate-*` packages to `@platejs/*`. Replace `@udecode/plate-` with `@platejs/` in your code.
## @platejs/list@49.0.0
- [#4327](https://github.com/udecode/plate/pull/4327) by [@zbeyens](https://github.com/zbeyens) –
- The previous `@udecode/plate-list` (classic list implementation) has been moved to `@platejs/list-classic`.
- **Migration for users of the classic list**:
- Rename all import paths from `@udecode/plate-list` to `@platejs/list-classic`.
- Update your `package.json`: remove the old `@udecode/plate-list` (if it was a direct dependency) and add `@platejs/list-classic`.
- This package, `@platejs/list`, now contains the functionality previously in `@udecode/plate-indent-list` (indent-based list system).
- Plugin names have been generalized: `IndentListPlugin` is now `ListPlugin`, `BaseIndentListPlugin` is `BaseListPlugin`, etc. (`*IndentList*` -> `*List*`).
- The primary plugin key is now `list` (e.g., `ListPlugin.key`) instead of `listStyleType`.
- Constants for list keys previously in `INDENT_LIST_KEYS` are now available under `KEYS` from `platejs`.
- Migration for constants:
- `INDENT_LIST_KEYS.listStyleType` -> `KEYS.listType`
- `INDENT_LIST_KEYS.todo` -> `KEYS.listTodo`
- `INDENT_LIST_KEYS.checked` -> `KEYS.listChecked`
- Other `INDENT_LIST_KEYS.*` map to `KEYS.*` accordingly.
- Removed `listStyleTypes` option from `ListPlugin`. You should control list rendering via `render.belowNodes` instead.
- Removed `renderListBelowNodes`.
- For changelogs of the indent-based list system (now in this package) version `<=48` (when it was `@udecode/plate-indent-list`), refer to its [archived changelog](https://github.com/udecode/plate/blob/7afd88089f4a76c896f3edf928b03c7e9f2ab903/packages/indent-list/CHANGELOG.md).
- [#4327](https://github.com/udecode/plate/pull/4327) by [@zbeyens](https://github.com/zbeyens) –
- Renamed all `@udecode/plate-*` packages to `@platejs/*`. Replace `@udecode/plate-` with `@platejs/` in your code.
## @platejs/list-classic@49.0.0
- [#4327](https://github.com/udecode/plate/pull/4327) by [@zbeyens](https://github.com/zbeyens) –
- **Removed Default Shortcuts** for `BulletedListPlugin` and `NumberedListPlugin`.
- These shortcuts must now be configured manually using the `shortcuts` field.
- Example:
```tsx
BulletedListPlugin.configure({
shortcuts: { toggle: { keys: 'mod+alt+5' } },
});
NumberedListPlugin.configure({
shortcuts: { toggle: { keys: 'mod+alt+6' } },
});
```
- Package `@udecode/plate-list` has been moved to `@platejs/list-classic`.
- **Migration**:
- Rename all import paths from `@udecode/plate-list` to `@platejs/list-classic`.
- Update your `package.json`: remove `@udecode/plate-list` and add `@platejs/list-classic`.
- For changelogs of `@udecode/plate-list` version `<=48`, refer to its [archived changelog](https://github.com/udecode/plate/blob/7afd88089f4a76c896f3edf928b03c7e9f2ab903/packages/list/CHANGELOG.md).
## @platejs/markdown@49.0.0
- [#4327](https://github.com/udecode/plate/pull/4327) by [@zbeyens](https://github.com/zbeyens) –
- Function `indentListToMdastTree` has been renamed to `listToMdastTree` to align with the list plugin renames (`IndentListPlugin` -> `ListPlugin`).
- [#4327](https://github.com/udecode/plate/pull/4327) by [@zbeyens](https://github.com/zbeyens) –
- Renamed all `@udecode/plate-*` packages to `@platejs/*`. Replace `@udecode/plate-` with `@platejs/` in your code.
## @platejs/math@49.0.0
- [#4327](https://github.com/udecode/plate/pull/4327) by [@zbeyens](https://github.com/zbeyens) –
- Renamed all `@udecode/plate-*` packages to `@platejs/*`. Replace `@udecode/plate-` with `@platejs/` in your code.
## @platejs/media@49.0.0
- [#4327](https://github.com/udecode/plate/pull/4327) by [@zbeyens](https://github.com/zbeyens) –
- Renamed all `@udecode/plate-*` packages to `@platejs/*`. Replace `@udecode/plate-` with `@platejs/` in your code.
## @platejs/mention@49.0.0
- [#4327](https://github.com/udecode/plate/pull/4327) by [@zbeyens](https://github.com/zbeyens) –
- The type `TMentionInputElement` has been removed.
- Use `TComboboxInputElement` from `@udecode/plate` instead for input elements, as mention functionality is built upon the combobox.
- [#4327](https://github.com/udecode/plate/pull/4327) by [@zbeyens](https://github.com/zbeyens) –
- Renamed all `@udecode/plate-*` packages to `@platejs/*`. Replace `@udecode/plate-` with `@platejs/` in your code.
## @platejs/node-id@49.0.0
- [#4327](https://github.com/udecode/plate/pull/4327) by [@zbeyens](https://github.com/zbeyens) –
- Package `@udecode/plate-node-id` has been deprecated.
- `NodeIdPlugin` functionality is now part of `@platejs/core` and is **enabled by default**.
- Migration:
- Remove `NodeIdPlugin` from your explicit plugin list if it was added manually.
- Remove `@udecode/plate-node-id` from your dependencies.
- If you had `NodeIdPlugin` configured with options, move these options to the `nodeId` field in your main editor configuration (`createPlateEditor` or `usePlateEditor` options).
Example:
```ts
// Before
// const editor = usePlateEditor({
// plugins: [
// NodeIdPlugin.configure({ /* ...your options... */ }),
// ],
// });
// After
const editor = usePlateEditor({
nodeId: {
/* ...your options... */
},
// ...other editor options
});
```
- If you want to disable automatic node ID generation (to replicate behavior if you weren't using `NodeIdPlugin` before), set `nodeId: false` in your editor configuration.
## @platejs/normalizers@49.0.0
- [#4327](https://github.com/udecode/plate/pull/4327) by [@zbeyens](https://github.com/zbeyens) –
- Package `@udecode/plate-normalizers` has been deprecated.
- Its plugins have been moved to `platejs` (which is re-exported via `platejs`).
- Migration:
- Remove `@udecode/plate-normalizers` from your dependencies.
- Update import paths to use `platejs`
## @platejs/playwright@49.0.0
- [#4327](https://github.com/udecode/plate/pull/4327) by [@zbeyens](https://github.com/zbeyens) –
- Renamed all `@udecode/plate-*` packages to `@platejs/*`. Replace `@udecode/plate-` with `@platejs/` in your code.
## @platejs/reset-node@49.0.0
- [#4327](https://github.com/udecode/plate/pull/4327) by [@zbeyens](https://github.com/zbeyens) – Package `@udecode/plate-reset-node` has been deprecated. Its functionality (e.g., `ResetNodePlugin`) is now exclusively configured using the `rules.break` and `rules.delete` options on plugin definitions. Migration:
- Remove `@udecode/plate-reset-node` from your dependencies.
- Remove any usage of `ResetNodePlugin` from your project.
- Configure reset behaviors directly on the relevant plugins by defining `rules.break` and/or `rules.delete`.
**Example: Resetting a Blockquote to a Paragraph**
```typescript
ResetNodePlugin.configure({
options: {
rules: [
{
types: [BlockquotePlugin.key],
defaultType: ParagraphPlugin.key,
hotkey: 'Enter',
predicate: (editor) =>
editor.api.isEmpty(editor.selection, { block: true }),
},
],
},
});
// After
BlockquotePlugin.configure({
rules: {
break: { empty: 'reset' },
delete: { start: 'reset' },
},
});
```
**For custom reset logic (previously `onReset`):**
```typescript
// Before
ResetNodePlugin.configure({
options: {
rules: [
{
types: [CodeBlockPlugin.key],
defaultType: ParagraphPlugin.key,
hotkey: 'Enter',
predicate: isCodeBlockEmpty,
onReset: unwrapCodeBlock,
},
],
},
});
// After
CodeBlockPlugin.configure({
rules: {
delete: { empty: 'reset' },
},
}).overrideEditor(({ editor, tf: { resetBlock } }) => ({
transforms: {
resetBlock(options) {
if (
editor.api.block({
at: options?.at,
match: { type: editor.getType(CodeBlockPlugin.key) },
})
) {
unwrapCodeBlock(editor);
return;
}
return resetBlock(options);
},
},
}));
```
## @platejs/resizable@49.0.0
- [#4327](https://github.com/udecode/plate/pull/4327) by [@zbeyens](https://github.com/zbeyens) –
- Renamed all `@udecode/plate-*` packages to `@platejs/*`. Replace `@udecode/plate-` with `@platejs/` in your code.
## @platejs/select@49.0.0
- [#4327](https://github.com/udecode/plate/pull/4327) by [@zbeyens](https://github.com/zbeyens) –
- The following plugins now default to `editOnly: true`. This means their core functionalities (handlers, rendering injections, etc.) will be disabled when the editor is in read-only mode. To override this behavior for a specific plugin, configure its `editOnly` field. For example, `SomePlugin.configure({ editOnly: false })`.
- [#4327](https://github.com/udecode/plate/pull/4327) by [@zbeyens](https://github.com/zbeyens) –
- Package `@udecode/plate-select` has been deprecated.
- `SelectOnBackspacePlugin` has been removed. This behavior is now built into Plate by default: delete (backward/forward) at the start of a block will select the previous/next void block instead of removing it.
- `DeletePlugin` has been removed. This behavior is now built into Plate by default: delete (backward/forward) from an empty block will remove it instead of merging.
- `RemoveEmptyNodesPlugin` has been removed. This behavior is now available through the `rules: { normalize: { removeEmpty: true } }` configuration on individual plugins.
- Migration:
- Remove `@udecode/plate-select` from your dependencies.
- Remove any usage of `SelectOnBackspacePlugin`, `DeletePlugin` from your project.
- Replace `RemoveEmptyNodesPlugin.configure({ options: { types: ['custom'] } })` with `CustomPlugin.configure({ rules: { normalize: { removeEmpty: true } } })`. This is used by our `LinkPlugin`.
## @platejs/selection@49.0.0
- [#4327](https://github.com/udecode/plate/pull/4327) by [@zbeyens](https://github.com/zbeyens) –
- The following plugins now default to `editOnly: true`. This means their core functionalities (handlers, rendering injections, etc.) will be disabled when the editor is in read-only mode. To override this behavior for a specific plugin, configure its `editOnly` field. For example, `SomePlugin.configure({ editOnly: false })`.
- [#4327](https://github.com/udecode/plate/pull/4327) by [@zbeyens](https://github.com/zbeyens) –
- Renamed all `@udecode/plate-*` packages to `@platejs/*`. Replace `@udecode/plate-` with `@platejs/` in your code.
## @platejs/slash-command@49.0.0
- [#4327](https://github.com/udecode/plate/pull/4327) by [@zbeyens](https://github.com/zbeyens) –
- The following plugins now default to `editOnly: true`. This means their core functionalities (handlers, rendering injections, etc.) will be disabled when the editor is in read-only mode. To override this behavior for a specific plugin, configure its `editOnly` field. For example, `SomePlugin.configure({ editOnly: false })`.
- [#4327](https://github.com/udecode/plate/pull/4327) by [@zbeyens](https://github.com/zbeyens) –
- Renamed all `@udecode/plate-*` packages to `@platejs/*`. Replace `@udecode/plate-` with `@platejs/` in your code.
- [#4327](https://github.com/udecode/plate/pull/4327) by [@zbeyens](https://github.com/zbeyens) –
- The type `TSlashInputElement` has been removed.
- Use `TComboboxInputElement` from `platejs` instead for Slash Command input elements, as slash command functionality is built upon the combobox.
## @platejs/suggestion@49.0.0
- [#4327](https://github.com/udecode/plate/pull/4327) by [@zbeyens](https://github.com/zbeyens) –
- Renamed all `@udecode/plate-*` packages to `@platejs/*`. Replace `@udecode/plate-` with `@platejs/` in your code.
## @platejs/tabbable@49.0.0
- [#4327](https://github.com/udecode/plate/pull/4327) by [@zbeyens](https://github.com/zbeyens) –
- Renamed all `@udecode/plate-*` packages to `@platejs/*`. Replace `@udecode/plate-` with `@platejs/` in your code.
## @platejs/table@49.0.0
- [#4327](https://github.com/udecode/plate/pull/4327) by [@zbeyens](https://github.com/zbeyens) –
- Renamed all `@udecode/plate-*` packages to `@platejs/*`. Replace `@udecode/plate-` with `@platejs/` in your code.
## @platejs/tag@49.0.0
- [#4327](https://github.com/udecode/plate/pull/4327) by [@zbeyens](https://github.com/zbeyens) –
- Renamed all `@udecode/plate-*` packages to `@platejs/*`. Replace `@udecode/plate-` with `@platejs/` in your code.
## @platejs/test-utils@49.0.0
- [#4327](https://github.com/udecode/plate/pull/4327) by [@zbeyens](https://github.com/zbeyens) –
- Renamed all `@udecode/plate-*` packages to `@platejs/*`. Replace `@udecode/plate-` with `@platejs/` in your code.
## @platejs/toc@49.0.0
- [#4327](https://github.com/udecode/plate/pull/4327) by [@zbeyens](https://github.com/zbeyens) –
- Renamed all `@udecode/plate-*` packages to `@platejs/*`. Replace `@udecode/plate-` with `@platejs/` in your code.
## @platejs/toggle@49.0.0
- [#4327](https://github.com/udecode/plate/pull/4327) by [@zbeyens](https://github.com/zbeyens) –
- Renamed all `@udecode/plate-*` packages to `@platejs/*`. Replace `@udecode/plate-` with `@platejs/` in your code.
## @platejs/trailing-block@49.0.0
- [#4327](https://github.com/udecode/plate/pull/4327) by [@zbeyens](https://github.com/zbeyens) –
- The following plugins now default to `editOnly: true`. This means their core functionalities (handlers, rendering injections, etc.) will be disabled when the editor is in read-only mode. To override this behavior for a specific plugin, configure its `editOnly` field. For example, `SomePlugin.configure({ editOnly: false })`.
- [#4327](https://github.com/udecode/plate/pull/4327) by [@zbeyens](https://github.com/zbeyens) –
- Package `@udecode/plate-trailing-block` has been deprecated.
- Its functionality (e.g., `TrailingBlockPlugin`) has been moved to `@platejs/utils` (which is re-exported via `platejs`).
- Migration:
- Remove `@udecode/plate-trailing-block` from your dependencies.
- Update import paths to use `platejs` (e.g., `import { TrailingBlockPlugin } from 'platejs';`).
## @platejs/yjs@49.0.0
- [#4327](https://github.com/udecode/plate/pull/4327) by [@zbeyens](https://github.com/zbeyens) –
- Renamed all `@udecode/plate-*` packages to `@platejs/*`. Replace `@udecode/plate-` with `@platejs/` in your code.
npx shadcn@latest add @plate/migration-index-docsUsage varies by registry entry. Refer to the registry docs or source files below for details.